You have no items to compare.
Welcome to MS Technology
About Us
PADKONDE MS TESTING LABORATORY (PMS LAB) is a highly esteemed commercial Polymer and Plastic Testing Laboratory located in Wagholi, Pune. We are a NABL and BIS accredited laboratory, committed to maintaining the highest standards of quality, accuracy, and technical competence in material testing as per IS/ISO/ASTM Standards.
Our laboratory is equipped with state-of-the-art infrastructure and advanced, modern testing equipment, enabling us to deliver precise, reliable, and repeatable test results. We specialize in comprehensive testing and evaluation of plastics, Pipes, polymers, rubber, and polymer-based materials,Including thermoplastics, thermosets, elastomers, polymer compounds, masterbatches, and finished plastic products. catering to a wide range of industries including packaging, automotive, agricultural, Irrigation, construction, consumer goods, and manufacturing sectors.
Count on PADKONDE MS TESTING LABORATORY for accurate, dependable, and timely testing services. We are dedicated to providing top-notch polymer and plastic testing solutions that help our clients achieve consistent product quality, performance reliability, and market compliance.
Testing Facility
Certificates
Contact Us
PADKONDE MS TESTING LABORATORY LLP
Address: GAT NO. 1357, KAWADE VASTI, SAI SATYAM PARK, PUNE-NAGAR ROAD, WAGHOLI, PUNE, MAHARASHTRA, INDIA
Mobile No: 8237066078
Email: pmstestinglab@gmail.com
Google Map Location:
Follow Us On:
Test Parameters
IS :12786-Irrigation Equipment Lateral Pipe
- Cl. 4.2(Carbon Black Content)
- Cl. 4.2(Carbon Black Dispersion)
- Cl. 5 and Table 1(DIMENSIONS OF PIPES - outside diameters
- Cl. and Table 1(DIMENSIONS OF PIPES - wall thickness shall)
- Cl.6.1(Visual Appearance)
- Cl.7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)
- Cl. 7.1 Table -2(Quality Test for 100 hrs @ 70 c & 2.2 Mpa)
- Cl 7.2(Reversion Test)
- Cl 7.3(Tensile Test)
- Cl.7.4(SusceptibiIity to Environmental Stress Cracking)
- Cl.4.1.a (Potyethylene - higher olefins constituent )
- Cl.4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)
- Cl.4.1.c.i (Density)
IS 13488- Irrigation Equipment Emitting Pipe
- Cl.5.1.2(Carbon Black content - IS 2530 : 1963)
- Cl.5.1.2 (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)
- Cl.6.2.2(Fittings)
- Cl.6.3(General)
- Cl.8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)
- Cl.8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure
- Cl.8.3.1(Wall Thickness of Emitting Pipe)
- Cl.8.3.2(Inside Diameter ofEmitting Pipe)
- Cl.8.3.3(Flow Paths in Emitting Unit)
- Cl.8.3.4(Spacing ofEmitter Units)
- Cl.8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature
- Cl.8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature
- Cl.8.5(Resistance to Tension at Elevated Temperature
- Cl.8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)
- Cl.8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)
- Cl.8.8(Determination of Emitting Unit Exponent)
IS 15351- HDPE Woven Geo membrane For Water Proof Lining
- Cl.5.3(Joints/Seams)
- Cl.5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)
- Cl.5.1.1 and 6.2(Mass, g/sq m)
- Cl.5.1.1 and 6.2(Length)
- Cl.5.1.1 and 6.2(Width)
- Cl.5.1.1 and 6.2(Carbon black content, Percent- IS 2530)
- Cl.5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min)
- Cl.5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)
- Cl.Table-1(Breaking load on 20 × 10 cm strip, N, Min after)
- Cl.5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)
- Cl.5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))
- Cl.5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)
- Cl.5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)
- Cl.5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)
- Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)
- Cl.5.1.1 and 6.2(Hydrostatic resistance-Annex E)
- Cl.5.1.1 and 6.2(Ash content, percent, Max-Annex F)
- Cl.Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E
IS 4984:2016: HDPE Pipes For Water Supply
- Cl.6.2(Colour)
- Cl.6.2.1(6.1.1 Identification Stripes)
- Cl.7.2(Length)
- Cl-7.4(Mean Outside Diameter
- Cl.7.4.1.2(Ovality)
- Cl.8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics
- Cl.8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)
- Cl.8.2(Longitudinal Reversion Test
- Cl.8.3(Carbon black)
- Cl.8.4(Melt Flow Rate)
- Cl.8.5 (Oxidation Induction Time)
- Cl.8.7(Density)
- Cl.8.8(Tensile Strength for Butt-fusion)
- Cl.8.9 table-6(Elongation at Break)
- Cl.8.10(Slow Crack Growth Rate)
- Cl.5.2(Density)
- Cl.5.2(MFI @ 1900C/5.0 Kg)
- Cl.5.2(Volatile matter Content)
IS 17425: Polyethylene Pipes and Fittings for Sprinkler Irrigation
- Cl.5(Dimensions of pipe - i) Outside diameter)
- Cl.5(Dimensions of pipe - ii) Wall thickness minimum)
- Cl.6(Visual Appearance)
- Cl.7.1(Hydraulic Characteristics - Quality test)
- Cl.7.1(Hydraulic Characteristics - Acceptance test)
- Cl.7.2(Reversion Test)
- Cl.7.3(Tensile Test- i) Tensile Strength)
- Cl.7.3(Tensile Test - ii)Elongation at Break)
- Cl.7.4(Fusion Compatibility Test- a) Quality test)
- Cl.7.4(Fusion Compatibility Test- b) Acceptance test)
- Cl.7.5(Density)
- Cl.7.6(Melt Flow Rate)
- Cl.4.2(Carbon black- a)carbon content)
- Cl.4.2(Carbon black- b) Dispersion of carbon black)
- Cl.5.1.2(Ovality)
- Cl.4.3(Anti-oxidant)
- Cl. 4.2 , IS 2530-1963, Cl. 10(Carbon Black Content)
- Cl.4.1.2(MFR)
- Cl.4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive)
- Cl.3(CLASSIFICATION OF PIPES)
- Cl.4.1(Quick Coupled Male and Female Couplers)
- Cl.4.1.3(Workmanship and appearance)
- Cl.4.1.4(Holding attachments for coupler parts)
- Cl.6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)
- Cl.6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)
- Cl.10(Marking)
IS:16202:2014 Woven Ground Cover
- Cl.4.1(Linear Density, Denier)
- Cl.4.1(Heat Shrinkage, %)
- Cl.4.2(Plain Weave & Sett, ends & picks/dm)
- Cl.4.3(Colour)
- Cl.5.1, Table-1(Mass, g/m² , IS 1964)
- Cl.5.1, Table-1(Tensile Test, Kgf, IS 1969,Part-2)
- Cl.5.1, Table-1(Tear Strength, Kgf, IS 6489,Part-1)
- Cl.5.1, Table-1(Air permeability, cft/ft²/s, IS 11056)
- Cl.5.1, Table-1(Index puncture resistance, kgf, Annexure-B)
- Cl.5.1, Table-1(UV accelerated exposure testing, Annexure-C)
- Cl.5.1, Table-1(Water permeability, lt/m2 /s, IS 14324
- Cl.5.1, Table-1(Water Vapour Permeability, g/m²/day, ISO 11092)
- Cl.5.2(Dimension and Mass)
- Cl. 4.1(linear density of polypropylene tape)
- Cl. 4.1(Heat shrinkage of the tape at 60 and 90℃)
- Cl. 4.2(Fabric ground cover)
- Cl. 5.1, Table No. 1, (i)(Mass, g/m2)
- Cl. 5.1, Table No. 1, (ii)(Tensile strength (grab), kgf)
- Cl. 5.1, Table No. 1, (iv)(Air permeability, cft/ft²/s)
- Cl. 5.1, Table No. 1, (v)(Index puncture resistance, kgf)
- Cl. 5.1, Table No. 1, (vi)(UV accelerated exposure testing, percent strength retained)
- Cl.5.1, Table-1(Water permeability, lt/m2 /s, IS 14324)
- Cl. 5.1, Table No. 1, (viii)(water vapour permeability, g/m²/day)
- Cl. 5.2(Dimensions and Mass)
- Cl. 7(Packing thickness)
